Fictional example

Exhibit Light Exposure Log

Model ferry MF-07 · Two recorded sessions · Revision 2

For each session, the supplied lux value represents the entire interval. The sessions do not overlap. Divide minutes by 60 to get hours, then multiply by lux.

Model ferry MF-07 session ledger
SessionLuxMinutesHoursLux-hours
01 · 09:0024901.536
02 · 11:0018450.7513.5
Cumulative exposure (2 sessions)49.5

Session 02 correction

Original entry: 30 min ÷ 60 = 0.5 h. At 18 lux that was 9 lux-hours, giving an original total of 45 lux-hours.

Corrected entry: 45 min ÷ 60 = 0.75 h. At 18 lux that is 13.5 lux-hours. Revised total: 36 + 13.5 = 49.5 lux-hours.

Keep exact amounts until the sum. For a separate rounding check, 1 lux × 1 min ÷ 60 = 1/60 lux-hour, or ≈ 0.017 lux-hours to three decimal places. The check is outside the two-session total.

A missing reading or duration leaves its exposure blank. An explicit zero is a number. Negative readings or durations need correction.