Printable dispatch worksheet
Completed interlibrary loan dispatch sheet
Fictional practice. Each section starts from its own input in the practice records.
Initial check
BX1 · Hold
Outside label: CED · Libraries inside: CED
Planned: ILL-041 / ILL-042
Packed on paper: ILL-041 / ILL-042
Seen inside: ILL-041 / ILL-042
Reason: ILL-042 packing entry says BIR. Request and slip S042 say CED.
Next action: Verify S042, correct the packing entry and recheck all of BX1.
BX2 · Approved
Outside label: BIR · Libraries inside: BIR
Planned: ILL-043
Packed on paper: ILL-043
Seen inside: ILL-043
Reason: IDs, single receiving library, label and slip terms agree.
Next action: Ready under the practice rules.
Request rows
Records and enclosed slip agree.
Packing destination conflict
Records and enclosed slip agree.
After correction
BX1 · Approved
Outside label: CED · Libraries inside: CED
Planned: ILL-041 / ILL-042
Packed on paper: ILL-041 / ILL-042
Seen inside: ILL-041 / ILL-042
Reason: IDs, single receiving library, label and slip terms agree.
Next action: Ready under the practice rules.
BX2 · Approved
Outside label: BIR · Libraries inside: BIR
Planned: ILL-043
Packed on paper: ILL-043
Seen inside: ILL-043
Reason: IDs, single receiving library, label and slip terms agree.
Next action: Ready under the practice rules.
Request rows
Records and enclosed slip agree.
S042 confirms CED. Replaced the BIR packing entry.
Records and enclosed slip agree.
Missing packing row
BX1 · Hold
Outside label: CED · Libraries inside: CED
Planned: ILL-041 / ILL-042
Packed on paper: ILL-041
Seen inside: ILL-041 / ILL-042
Reason: ILL-042 is present and has no packing row.
Next action: Hold ILL-042 and all of BX1. Restore the row and recheck BX1.
BX2 · Approved
Outside label: BIR · Libraries inside: BIR
Planned: ILL-043
Packed on paper: ILL-043
Seen inside: ILL-043
Reason: IDs, single receiving library, label and slip terms agree.
Next action: Ready under the practice rules.
Request rows
Records and enclosed slip agree.
Missing packing row
Records and enclosed slip agree.
Mixed receiving libraries
BX1 · Hold
Outside label: CED · Libraries inside: CED / BIR
Planned: ILL-041 / ILL-042
Packed on paper: ILL-041 / ILL-042 / ILL-043
Seen inside: ILL-041 / ILL-042 / ILL-043
Reason: Mixed libraries: CED and BIR under one CED label.
Next action: Move ILL-043 to BX2. Recheck both boxes and both labels.
BX2 · Hold
Outside label: BIR · Libraries inside: —
Planned: ILL-043
Packed on paper: —
Seen inside: —
Reason: Empty box. ILL-043 was observed in BX1.
Next action: Return ILL-043 to BX2 and recheck BX1 and BX2.
Request rows
Records and enclosed slip agree.
Records and enclosed slip agree.
Wrong box assignment
Before releasing a box
- Keep one row per request or separately identified piece. Reconcile planned assignment, packing rows and IDs on the physical slips in both directions. Record discrepancies even when the packing row is absent.
- Check the request ID, receiving library, due date and loan restriction against the enclosed slip. Mark any missing, duplicate, blank or conflicting record Hold.
- Approve a nonempty box only after every request clears, the planned, packed and observed ID sets agree, all requests go to one receiving library, and the outside label names that library.
- When a packing row is missing, hold the request and its planned or observed box. If assignment is unclear, hold candidate boxes until the item is located. A separately reconciled box can go.
- When a box contains requests for different libraries, hold the whole box. Repack by receiving library and recheck every box that gains or loses an item before approving it.