K-2026-114 · Electric kiln E-2

Fictional example. Bisque firing · Nov 21, 2026 · Studio firing coordinator · program reference STUDIO-BISQUE-04 · evidence cones 04, 05, 06 in upper, middle, and lower zones.

StageTimeRecorded observation
Load completeNov 21 · 8:10 AM46 labeled pieces; three witness packs recorded.
Firing startedNov 21 · 9:05 AMController showed STUDIO-BISQUE-04 and segment 1.
In processNov 21 · 11:00 AMDisplay 318°F; segment 2; no alarm text visible.
In processNov 21 · 2:30 PMDisplay 1,126°F; segment 4; no alarm text visible.
Controller completeNov 21 · 6:42 PMDisplay showed Complete; event history showed no message.
Cooling checkNov 22 · 7:35 AMDisplay 184°F; kiln remained closed.
Unload completeNov 22 · 10:20 AM46 pieces counted; visual observations entered.

Post-run record

Status: Unload review recorded.

Witness cones: upper 04 bent / 05 beginning to bend / 06 upright; middle 04 bent / 05 beginning to bend / 06 upright; lower 04 bent / 05 upright / 06 upright.

Ware count: 46 unloaded; 44 without visible fracture; 2 with rim cracks set aside for studio review.

Exception: lower witness pack was about 12 mm from its sketched load position at unload. Time and cause of movement were not observed.

This is a record of one fictional run, not an operating procedure, temperature recommendation, safety approval, food-safety finding, or successful-firing certificate. Use the manufacturer's instructions and the studio's approved rules for any real firing.