Fictional example — replace every value

Riverstone Makerspace Safety Rules

Use only the rules, training states, protective equipment, and contacts approved for your actual facility.

Example status: ready for facility review · This page does not replace official training, equipment manuals, inspections, or emergency procedures.

Common rules

  • Check the equipment card before use.
  • Wear the listed protective equipment.
  • Secure hair, clothing, and loose items.
  • Keep guards and work areas clear.
  • No horseplay or unapproved materials.
  • Stop when conditions change.

Assembly bench

Open after orientation

Training: General orientation

PPE: Closed-toe shoes

Approval: Attendant in room

Drill press

Approved users only

Training: Drill press sign-off

PPE: Safety glasses

Approval: Attendant verifies status

Soldering station

Direct supervision

Training: Soldering briefing

PPE: Safety glasses

Approval: Attendant opens station

Broken equipment or injury: stop now

  1. Release the control if safe.
  2. Step back; keep others away.
  3. Tell the on-site attendant immediately.
  4. Do not diagnose, repair, or restart.

On-site contact

Makerspace attendant at front desk

Fictional extension 204

For emergencies, follow the facility’s approved emergency procedure.